GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.

  1. Remove the I/P upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement

  2. Object Number: 474605  Size: SH
  3. Remove the fasteners (3) from the head up display (HUD) (1).
  4. Disconnect the electrical connector (2) from the HUD .
  5. Remove the HUD (1) from the instrument panel.

Installation Procedure


    Object Number: 474605  Size: SH
  1. Connect the electrical connector (2) to the HUD (1).
  2. Install the HUD (1) to the I/P.
  3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the fasteners (3) into the HUD (1).
  5. Tighten
    Tighten the fasteners to 2 N·m (18 lb in).

  6. Install the I/P upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement .