Windshield Pillar Garnish Molding Replacement Standard
Removal Procedure
- Pull the windshield pillar
garnish molding away from the windshield pillar to disengage the retainer
clips.
- Remove the windshield pillar garnish molding.
Installation Procedure
- Position the lower the
end of the windshield pillar garnish molding behind instrument panel cover.
- Align the clips to the holes in the windshield pillar.
- Push in on the windshield pillar garnish molding to engage the
retainer clips.
Windshield Pillar Garnish Molding Replacement WC2, WC8
Removal Procedure
- Remove the front door weatherstrip. Refer to
Front Door Opening Weatherstrip Replacement
in Doors.
- Pull the outside edge of the trim (1) away from the armor plating (2).
- Rotate the trim towards the windshield in order to release the retaining
edge of the trim.
Installation Procedure
- Install the windshield side of the trim.
- Rotate the trim (1) towards the door opening until the trim snaps
into the armor plating (2).
- Install the front door weatherstrip. Refer to
Front Door Opening Weatherstrip Replacement
in Doors.