Removal Procedure
The head restraint retainers (1)
can be released without disassembling front seat.
The front seat head restraint is removed from the seat back by pushing
the release buttons on the headrest retainers (1) and pulling up on
the head restraint.
The release buttons on the head restraint retainers are located opposite
the notches on the head restraint shafts.
- Fully extend the head
restraint (1).
- Push in on the seat back directly below the head restraint shaft (2)
in order to locate the position of the head restraint retainers.
The release buttons for the head restraint are located at the top of
the retainers.
- Push forward on the rear of the seat back (2), at the retainer
location, and pull up on the head restraint (1) in order to remove
the front seat head restraint (1).
Installation Procedure
- Align the head restraint (1)
with the openings in the seat back.
The notches on the head restraint shaft face the front of the vehicle.
- Push the head restraint (1) downward into the seat back
in order to engage the head restraint into the retainers.
- Check for proper operation of the head restraint.