Removal Procedure
Caution: Refer to SIR Caution in the Preface section.
- Push in and up on the front of the rear
seat cushion.
- Lift upward on the seat cushion.
- Disconnect the heated seat electrical connectors, if equipped.
- Remove the seat cushion from the vehicle.
Installation Procedure
- Install the seat cushion into the vehicle.
- Connect the heated seat electrical connectors.
- Engage the 2 locator tabs on the seat bottom, under the seat back.
Important: Pull up on the front of the rear seat cushion to ensure that the cushion is
secure.
- Push down and rearward to seat the cushion into the latches in the
#4 bar.