Caution: When carrying an undeployed inflatable restraint seat belt pretensioner:
• Do not carry the seat belt pretensioner by the wires or connector. • Carry the seat belt pretensioner by the piston tube, keeping hands and
fingers away from the cable. • Make sure the open end of the seat belt pretensioner piston tube points
away from you and other people. • Do not cover the seat belt pretensioner piston tube opening with your
hand.
Caution: Refer to SIR Inflator Module Handling and Storage Caution in the Preface section.
Important: Note the wiring and connector routing during the removal, in order to route the wiring properly during assembly.
Important: The pretensioner has a locating tab that ensures the pretensioner is in the proper position.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the nut to 41 N·m (30 lb ft).