Stabilizer Shaft Link Replacement FE1, FE3

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the stabilizer link bolt and nut.
3. Remove the stabilizer link washers, insulators, and spacer.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Install the stabilizer link insulators, washers, spacer, nut and bolt.

Tighten
Tighten the stabilizer link nut to 17 N·m (13 lb ft).

2. Lower the vehicle.

Stabilizer Shaft Link Replacement FE7

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tires and wheels. Refer to Tire and Wheel Removal and Installation .
3. Remove the stabilizer shaft link bolt and nut.
4. Remove the stabilizer shaft link washers, insulators, and spacer.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Install the stabilizer link insulators, washers, spacer, nut and bolt.

Tighten
Tighten the stabilizer link nut to 23 N·m (17 lb ft).

2. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
3. Lower the vehicle.