The navigation system's voice recognition allows for hands-free operation of
navigation and audio system features. Voice recognition can be used when the ignition
is on or when Retained Accessory Power (RAP) is active.
This feature only works if the map DVD is inserted. If you try to use voice
recognition without the map DVD inserted, the system will display "Please insert
the navigation map DVD to use the voice recognition feature."
To use navigation voice recognition, do the following:
-
Press the talk symbol steering wheel control and release it when you hear a
beep. The audio system, if on, will mute.
- Clearly state one of the commands listed on the following pages. For example,
say "FM1".
- The system will tell you the command being implemented. For example, the
system will say "FM1 Radio" and change the audio system to the FM1 source.
END: Press this steering wheel control to end voice recognition
or to cancel a command. To cancel a command, press END immediately after speaking
the command. You will hear a beep confirming the cancellation.
You may
also end voice recognition by not speaking any commands. After about five seconds
of silence, the system will automatically cancel voice recognition.
At times, the system may not understand a spoken command. If this happens, try
again. If a spoken command is not available, the system will provide feedback based
on availability.
While using voice recognition, make sure to keep interior noise levels to a
minimum. Otherwise, the system might not recognize voice commands.
The system will only recognize commands spoken in English.
Voice Recognition Commands
The following list shows all of the voice commands available for the navigation
system with a brief description of each. To use the voice commands, refer to the instructions
listed previously.
Help Commands
These commands are universal and will enable you to use the help prompts available
from the system.
Map Help: This command will enable the system to provide the
available commands for the map screen.
Destination Help: This command will enable the system to provide
the available commands for entering a destination.
Guidance Help: This command will enable the system to provide
the available commands for the guidance method.
Radio Help: This command will enable the system to provide the
available commands for the radio.
Disc Help: This command will enable the system to provide the
available commands for the CD changer.
Radio Commands
Radio: This command will change the audio system to the next
radio audio source.
AM: This command will change the audio system to the AM audio
source.
FM1: This command will change the audio system to the FM1 audio
source.
FM2: This command will change the audio system to the FM2 audio
source.
CD Changer: This command will change the audio system to the
CD changer audio source.
WX, Weather Band: These commands will change the audio system
to the weather band audio source.
Power On, Audio On: These commands will turn the system's power
on.
Power Off, Audio Off: These commands will turn the system's
power off.
DSP On: This command will turn the audio system's DSP on.
DSP Off: This command will turn the audio system's DSP off.
DSP Front Seat: This command will change the audio system's
DSP to the front seat setting.
DSP Spacious: This command will change the audio system's DSP
to the spacious setting.
DSP Talk: This command will change the audio system's DSP to
the talk setting.
DSP Ambience: This command will change the audio system's DSP
to the ambience setting.
Seek Up: This command will cause the selected audio source to
seek up to the next strongest signal.
Seek Down: This command will cause the selected audio source
to seek down to the next strongest signal.
Stop Scan: This command will cause the audio source to stop
scanning for the next strongest signal.
CD Changer Commands
Track Up: This command will cause the CD changer to skip up
to the next track.
Previous Track, Track Down: This command will cause the CD changer
to go to the previous track.
Phone Command
Phone: This command will activate the factory-installed optional
cellular phone system or OnStar® system. See the Cellular Phone System manual
and "OnStar® System" in Section 2 of your vehicle's owner manual for
more information.
Screen Commands
Screen Day Mode, Day Mode On: These commands will adjust the
system's screen setting to the day mode.
Screen Night Mode, Night Mode On: These commands will adjust
the system's screen setting to the night mode.
Screen Auto Mode, Auto Mode On: These commands will adjust the
system's screen setting to auto mode.
Screen Off: This command will turn the system's screen display
off.
Position Commands
Current Position, Current Location, Show Current Position, Show Current Location: These commands will cause the system to display the vehicle's current
location on the map screen.
Map: This command will cause the system to display the map screen.
Map Commands
Zoom In: This command will cause the system to zoom in when
on the map screen.
Zoom Out: This command will cause the system to zoom out when
on the map screen.
Maximum Scale: This command will cause the system to zoom out
to the maximum available map scale when on the map screen.
Minimum Scale: This command will cause the system to zoom in
to the minimum available map scale when on the map screen.
Heading Up, Change to Heading Up: These commands will cause
the system to display the Vehicle Up heading when on the map screen. The map scale
should be set for under 2 miles (4 km).
North Up, Change to North Up: These commands will cause the
system to display the North Up heading when on the map screen if the map scale is
set to 2 miles (4 km) or less.
Map Direction, Change Map Direction: These commands will cause
the system to change the vehicle's direction from North up to heading up or heading
up to North up on the map screen if the map scale is set to 2 miles (4 km)
or less.
Mark, Mark This Point: These commands will cause the system
to mark the location as a memory point while on the map screen.
Destination Commands
Home, Go Home: These commands will cause the system to enter
the Home destination, if one is set.
Go To Starting Point, Previous Starting Point: These commands
will cause the system to enter the last available starting point as a destination.
Guidance Commands
Repeat Guidance, Repeat Voice: These commands will cause the
system to repeat the last available voice prompt guidance command if a destination
has been set.
Louder: This command will cause the system to increase the volume
of the navigation voice prompts if a destination has been set.
Softer: This command will cause the system to decrease the volume
of the navigation voice prompts if a destination has been set.
Voice Guidance Off: This command will cause the system to turn
off the navigation voice prompts if a destination has been set.
Voice Guidance On: This command will cause the system to turn
on the navigation voice prompts if a destination has been set.
Open Guidance, Open Guidance Screen, Open Guide, Open Guide Screen: These commands will cause the system to open the Guidance Appearance menu if
a destination has been set.
Close Guidance, Close Guidance Screen, Close Guide, Close Guide Screen: These commands will cause the system to close the Guidance Appearance menu
if a destination has been set.
Arrow Guidance, Arrow Guide, Change To Arrow Guidance, Change To Arrow Guide: These commands will cause the system to change to Arrow Guidance
screen view in the Guidance Menu if a destination has been set.
Turn List Guidance, Turn List Guide, Change to Turn List Guidance, Change to
Turn List Guide: These commands will cause the system to change to
Turn List Guidance screen view in the Guidance Menu if a destination has been set.
Entire Route, Entire Rout Map, Route Overview: These commands
will cause the system to display the entire route if a destination has been set.
Reroute: This command will cause the system to generate an alternate
route to a set destination while on a planned route.
Detour, Detour Entire Route: These commands will cause the system
to activate the detour feature when driving a planned route.
Delete Destination, Cancel Destination: These commands will
cancel a destination if one has been set.
Next Waypoint Map: This command will cause the system to display
the map view of the next waypoint location if one has been set.
First Waypoint Map: This command will cause the system to display
the map view of the first waypoint location if one has been set.
Second Waypoint Map: This command will cause the system to display
the map view of the second waypoint location if more than one waypoint has been set.
Third Waypoint Map: This command will cause the system to display
the map view of the third waypoint location if more than two waypoints have been set.
Fourth Waypoint Map: This command will cause the system to display
the map view of the fourth waypoint location if more than three waypoints have been
set.
Fifth Waypoint Map: This command will cause the system to display
the map view of the fifth waypoint location if more than four waypoints have been
set.
Destination Map: This command will cause the system to display
the map view of the final destination location if one has been set.
Point of Interest (POI) Commands
The following commands will cause the system to display icons if they are available
on the map screen when the map scale is set to a half mile (eight-tenths km)
or less.
Restaurant, I'm Hungry: These commands will cause the system
to display restaurant POI icons.
American Restaurant, American Food: These commands will cause
the system to display American restaurant POI icons.
Chinese Restaurant, Chinese Food: These commands will cause
the system to display Chinese restaurant POI icons.
Continental Restaurant, Continental Food: These commands will
cause the system to display Continental restaurant POI icons.
French Restaurant, French Food: These commands will cause the
system to display French restaurant POI icons.
Italian Restaurant, Italian Food: These commands will cause
the system to display Italian restaurant POI icons.
Japanese Restaurant, Japanese Food: These commands will cause
the system to display Japanese restaurant POI icons.
Mexican Restaurant, Mexican Food: These commands will cause
the system to display Mexican restaurant POI icons.
Seafood Restaurant, Seafood: These commands will cause the system
to display Seafood restaurant POI icons.
Other Restaurant, Other Food: These commands will cause the
system to display other types of restaurant POI icons.
Shopping, Shopping Mall: These commands will cause the system
to display mall POI icons.
Grocery Store: This command will cause the system to display
grocery store POI icons.
Gas Station, Gas: These commands will cause the system to display
gas station POI icons.
Parking Garage: This command will cause the system to display
parking garage POI icons.
Parking Lot: This command will cause the system to display parking
lot POI icons.
Rental Car Agency: This command will cause the system to display
rental car POI icons.
Automobile Club, Triple A: These commands will cause the system
to display auto club POI icons.
Auto Service And Maintenance, Auto Service, Maintenance: These
commands will cause the system to display auto service POI icons.
Hotel: This command will cause the system to display hotel POI
icons.
Golf Course: This command will cause the system to display golf
course POI icons.
Ski Resort, Skiing: These commands will cause the system to
display ski resort POI icons.
Amusement Park: This command will cause the system to display
amusement park POI icons.
Sport Complex, Stadium: These commands will cause the system
to display sports complex POI icons.
Casino: This command will cause the system to display casino
POI icons.
Marina: This command will cause the system to display marina
POI icons.
Tourist Attraction: This command will cause the system to display
tourist attraction POI icons.
Winery: This command will cause the system to display winery
POI icons.
City Hall: This command will cause the system to display city
hall POI icons.
Police Station: This command will cause the system to display
police station POI icons.
Library: This command will cause the system to display library
POI icons.
Hospital: This command will cause the system to display hospital
POI icons.
Park & Recreation, Parks & Recreation: These commands
will cause the system to display parks and recreation POI icons.
Civic Center, Community Center: These commands will cause the
system to display community center POI icons.
Convention Center, Exhibition Center: These commands will cause
the system to display convention center POI icons.
Court House: This command will cause the system to display court
house POI icons.
Train Station: This command will cause the system to display
train station POI icons.
Airport: This command will cause the system to display airport
POI icons.
Bus Station: This command will cause the system to display bus
station POI icons.
Commuter Rail Station: This command will cause the system to
display commuter rail station POI icons.
Ferry Terminal: This command will cause the system to display
ferry terminal POI icons.
Park & Ride: This command will cause the system to display
park & ride POI icons.
Rest Area, Rest Stop: These commands will cause the system to
display rest area POI icons.
Tourist Information: This command will cause the system to display
tourist information POI icons.
Historical Monument: This command will cause the system to display
historical monument POI icons.
Performing Arts: This command will cause the system to display
performing arts POI icons.
Museum: This command will cause the system to display museum
POI icons.
Bank: This command will cause the system to display bank POI
icons.
School: This command will cause the system to display school
POI icons.
ATM: This command will cause the system to display ATM POI icons.
Higher Education, University, College: These commands will cause
the system to display higher education POI icons.
Business Facility: This command will cause the system to display
business facility POI icons.
City Center: This command will cause the system to display city
center POI icons.
POI Off: This command will cause the system to turn off POIs
so they do not appear on the map screen.