This bulletin is being revised. Original bulletin was missing artwork. Drivers and right front seat passengers of some 1990 Eldorados and 1990-1991 Coupe Devilles and Fleetwood Coupes may experience a condition of the shoulder belt contacting or rubbing against the neck. This condition may be improved by using the following procedure to install drest guide loop. Use the following chart to select the correct part number according to color. Parts are currently available from GMSPO.
Passenger's Driver's Color Side P/N Side P/N ----------------- ------------ --------- White 16705926 16705927 Black 16705928 16705929 Dark Sapphire 16705930 16705931 Light Yellow 16705932 16705933 Medium Antelope 16705934 16705935 Medium Beechwood 16705936 16705937 Dark Auburn 16705938 16705939 Garnet Red 16705940 16705941 Medium Slate Gray 16705942 16705943
1. Remove the two headrest guide loop mounting screws and remove and discard the old guide loop. Refer to Figure 1.
2. Position the shoulder belt so that it runs through the new guide loop.
3. Mount the new guide loop on the headrest by installing the original guide loop mounting screws. Refer to Figure 2.
4. Install the passenger side guide loop using the above procedure.
For warranty purposes use Labor Operation T6497 at .2 hour.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.