Remote Control Door Lock Receiver Replacement for Cadillac Eldorado 1998

1. Remove the rear electronic bay board. Refer to Electronics Bay Board Replacement in Body Rear End.
2. Disconnect the wiring harness connection.
3. Press on the locking tabs in order to remove the remote function actuator (RFA) module (1) from the left side of the electronics bay board.

1. Install the remote function actuator (RFA) (1) module onto the electronics bay board.
2. Connect the wiring harness connection.
3. Install the rear electronic bay board. Refer to Electronics Bay Board Replacement in Body Rear End.
4. Reprogram the transmitters. Refer to Transmitter Synchronization .