Tools Required

J 38185 Hose Clamp Pliers

1. Drain the cooling system. Refer to Cooling System Draining and Filling .
2. Remove the vacuum control solenoid valve. Refer to Secondary Air Injection Vacuum Control Solenoid Valve Replacement in Engine Controls.
3. Disconnect the heater hoses from the heater inlet pipe (1) using the J 38185 .



4. Remove the heater inlet pipe.

1. Connect the heater hoses to the heater inlet pipe (1) using the J 38185 .
2. Install the vacuum control solenoid valve. Refer to Secondary Air Injection Vacuum Control Solenoid Valve Replacement in Engine Controls.
3. Fill the cooling system. Refer to Cooling System Draining and Filling .