Tools Required

J 38185 Hose Clamp Pliers

1. Drain the cooling system. Refer to Cooling System Draining and Filling .
2. Remove the vacuum control solenoid valve. Refer to Secondary Air Injection Vacuum Control Solenoid Valve Replacement in Engine Controls.
3. Disconnect the heater hoses from the heater outlet pipe (2) using the J 38185 .



4. Remove the heater outlet pipe.

1. Connect the heater hoses to the heater outlet pipe (2) using the J 38185 .
2. Install the vacuum control solenoid valve. Refer to Secondary Air Injection Vacuum Control Solenoid Valve Replacement in Engine Controls.
3. Fill the cooling system. Refer to Cooling System Draining and Filling .