Tools Required

J 38778 Door Trim Pad Clip Remover

1. Open the hood.
2. Remove both front filler panels. Refer to Filler Panel Replacement - Upper .
3. Using the J 38778 remove the push-in retainers (1) from the sight shield (2).
4. Remove the radiator support sight shield (2).

1. Position the sight shield (2) to the radiator support.
2. Install new push-in retainers (1) in order to retain the radiator support sight shield (2).
3. Install both upper filler panels. Refer to Filler Panel Replacement - Upper .
4. Close the hood.