Test Description
The numbers below refer to the step numbers on the diagnostic table.
-
Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.
-
The presence of DTCs which begin with "U" indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.
Step | Action | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|
1 | Install a scan tool. Does the scan tool power up? | Go to Step 2 | Go to Scan Tool Does Not Power Up in Data Link Communications | ||||||
Does the scan tool communicate with all of the listed control modules? | Go to Step 3 | Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications | |||||||
3 | Select the display DTCs function on the scan tool for the following modules:
Does the scan tool display any DTCs? | Go to Step 4 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | ||||||
Does the scan tool display any DTCs which begin with a "U"? | Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications | Go to Step 5 | |||||||
5 | Does the scan tool display any PCM DTCs? | Go to Diagnostic Trouble Code (DTC) List in Engine Controls | Go to Step 6 | ||||||
6 | Does the scan tool display any EBCM DTCs? | Go to Diagnostic Trouble Code (DTC) List in ABS Traction Control | Go to Step 7 | ||||||
7 | Does the scan tool display DTC C0550? | Go to DTC C0550 | Go to Step 8 | ||||||
8 | Does the scan tool display DTC C0563? | Go to DTC C0563 | Go to Step 9 | ||||||
9 | Does the scan tool display DTC C0695? | Go to DTC C0695 | Go to Step 10 | ||||||
10 | Does the scan tool display DTC C0896? | Go to DTC C0896 |
