Removal Procedure
- Open the hood.
- Disconnect the washer solvent hose connector.
- Disconnect the retention clip securing the cruise control cable
to the left strut tower.
- Remove the cover (1)
from the engine compartment multi-use relay and fuse center assembly.
- Disconnect the electrical connector to the starter enable relay.
- Remove the starter enable relay (2).
Installation Procedure
- Connect the
electrical connector to the starter enable relay.
- Install the starter enable relay (2).
- Install the cover (1) to the engine compartment multi-use
relay and fuse center assembly.
- Secure the cruise control cable to the retention clip on the left
strut tower.
- Connect the washer solvent hose connector.
- Close the hood.