GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2001 🢒 Eldorado 🢒 Body and Accessories 🢒 Interior Trim 🢒 Assist Handle Replacement

Removal Procedure

    Object Number: 398497 Size: SH
  1. Gently pry out the outer edge of the escutcheon. Slide the escutcheon toward the center of the assist strap.
  2. Remove the 2 fasteners that retain the assist strap.
  3. Remove the assist strap.
  4. Remove the rear quarter trim panel. Refer to Rear Quarter Upper Trim Panel Replacement .
  5. Remove the retainers from the back of the quarter trim that retain assist strap to quarter trim.

Installation Procedure

    Object Number: 398497 Size: SH
  1. Install the retainers that secure the assist strap to quarter trim panel.
  2. Install quarter trim panel. Refer to Rear Quarter Upper Trim Panel Replacement .

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the two fasteners that retain assist strap and quarter trim to the body.

    4. Tighten
    Tighten the 2 fasteners to 1.6 N·m (14 lb in).

  4. Secure the assist strap escutcheons.