Tools Required

J 37043 Parking Brake Cable Release Tool

Caution: Refer to Brake Dust Caution in the Preface section.

1. Raise the vehicle and suitably support. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the right rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
3. Loosen the park brake cable at the adjuster.



4. Disconnect the right rear park brake cable (2) from the intermediate park brake cable connector (3).
5. Using J 37043 depress the right rear brake cable locking tabs (2).
6. Remove the right rear park brake cable (2) from the right rear park brake cable support bracket (1).



7. Using J 37043 depress the right rear park brake cable locking tabs.
8. Remove the right rear park brake cable (2) from the right rear caliper park brake cable bracket (1).
9. Remove the retainer clip from the park brake actuator lever (3).
10. Disconnect the right rear park brake cable (2) from the park brake actuator lever (3).

1. Connect the right rear park brake cable (2) to the park brake actuator lever (3).
2. Install the retainer clip to the park brake actuator lever (3).
3. Install the right rear park brake cable (2) to the right rear caliper park brake cable bracket (1). Ensure that the locking tabs are properly seated.



4. Press the right rear park brake cable (2) into the right rear park brake cable support bracket (1). Ensure that the locking tabs are properly seated.
5. Connect the intermediate park brake cable connector (3) to the right rear park brake cable (2).
6. Adjust the park brake cable at the adjuster. Refer to Park Brake Adjustment .
7. Install the right rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
8. Lower the vehicle.