Removal Procedure
- Remove the lower valve assembly. Refer to
Lower Valve Assembly Replacement
.
- Remove the parking gear. Refer to
Parking Gear Replacement
.
- Move the manual shaft from the park position.
- Drive out the parking
pawl pivot pin using a pin punch. Push down on the spring while driving the
pin out.
- Remove the parking pawl and the spring.
- Inspect the following:
• | Parking pawl tooth for damage |
• | Parking pawl spring for over expansion |
• | Pivot pin for scorning, excessive wear |
Installation Procedure
- Place the pawl in the
case slot. Attach the spring to the pawl.
- Insert the pivot pin through
the spring and pawl. The hook end of the spring locates on the case and the
square end on top of the parking pawl.
- Install the pivot pin using a mallet.
- Install the park gear. Refer to
Parking Gear Replacement
.
- Install the lower valve assembly and the bottom pan. Refer to
Lower Valve Assembly Replacement
.