For 1990-2009 cars only
- Install the windshield wiper and washer switch assembly to the lock housing cover and sleeve assembly.
- Lubricate the switch actuator pivot pin (2) with lithium grease.
- Install the switch actuator pivot pin (2) into the windshield wiper and washer switch assembly (1) and the lock housing cover and sleeve assembly.
- Pull the windshield wiper and washer switch assembly wire harness through the steering column.
- Install the windshield wiper and washer switch assembly connector to the bulkhead connector.
- Install the wire protector shield.
- Install the lock housing assembly. Refer to Lock Housing Assembly - Assemble - Off Vehicle .
Important: Use care not to damage the wires when pulling the windshield wiper and washer switch assembly wire harness through the steering column.
