| Table 1: | Indicators |
| Table 2: | DIC Warning Messages |
Symbol | Description |
|---|---|
AIR BAG | AIR BAG: Refer to SIR System Description and Operation in SIR |
ANTILOCK | Antilock: Refer to ABS Description and Operation in Antilock Brake System |
BRAKE 
| Brake: Refer Brake Warning System Description and Operation in Hydraulic Brakes |
| Charge: Refer to Charging System Description and Operation in Engine Electrical |
| Engine Coolant Temperature: Refer to Cooling System Description and Operation in Engine Cooling |
| Fasten Safety Belt: Refer to Seat Belt System Description and Operation in Seat Belts |
| Hazards: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
| High Beam: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
km/h | km/h: Refer to Indicator/Warning Message Description and Operation |
| Low Engine Oil Pressure: Refer to Indicator/Warning Message Description and Operation |
MPH | MPH: Refer to Indicator/Warning Message Description and Operation |
SECURITY | SECURITY: Refer to Theft Systems Description and Operation in Theft Deterrent |
SERVICE ENGINE SOON | Malfunction Indicator Lamp (MIL): Refer to Powertrain Control Module Description in Engine Controls - 4.6L |
TRACTION CONTROL | TRACTION CONTROL: Refer to ABS Description and Operation in Antilock Brake System |
| Turn Signals: Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
Symbol | Description |
|---|---|
APPLY BRAKE TO SHIFT - 46 | Refer to Automatic Transmission Shift Lock Control Description and Operation in Shift Lock Controls |
BATTERY NOT CHARGING - 7 | Refer to Charging System Description and Operation in Engine Electrical |
BATTERY VOLTAGE HIGH - 8 | Refer to Charging System Description and Operation in Engine Electrical |
BATTERY VOLTAGE LOW - 6 | Refer to Charging System Description and Operation in Engine Electrical |
CHANGE ENGINE OIL - 82 | Refer to Indicator/Warning Message Description and Operation |
CHANGE TRANS FLUID - 47 | Refer to Transmission Component and System Description in Automatic Transaxle - 4T80-E |
CHECK BRAKE FLUID - 37 | Refer to Brake Warning System Description and Operation in Hydraulic Brakes |
CHECK COOLANT LEVEL - 2 | Refer to Cooling System Description and Operation in Engine Cooling |
CHECK FUEL GAGE - 39 | Refer to Indicator/Warning Message Description and Operation |
CHECK GAS CAP - 61 | Refer to Powertrain Control Module Description in Engine Controls - 4.6L |
CHECK OIL LEVEL - 36 | Refer to Indicator/Warning Message Description and Operation |
CHECK WASHER FLUID - 25 | Refer to Wiper/Washer System Description and Operation in Wipers/Washer Systems |
CRUISE ENGAGED - 43 | Refer to Cruise Control Description and Operation in Cruise Control |
DOOR AJAR - 141 | Refer to Door Ajar Indicator Description and Operation in Doors |
DRIVER DOOR AJAR - 140 | Refer to Door Ajar Indicator Description and Operation in Doors |
ENGINE COOLANT HOT, IDLE ENGINE - 44 | Refer to Cooling System Description and Operation in Engine Cooling |
ENGINE HOT - AC OFF - 16 | Refer to Cooling System Description and Operation in Engine Cooling |
ENGINE OVERHEATED, STOP ENGINE - 42 | Refer to Cooling System Description and Operation in Engine Cooling |
ENGINE POWER REDUCED - 41 | Refer to Powertrain Control Module Description in Engine Controls - 4.6L |
FUEL LEVEL LOW - 11 | Refer to Indicator/Warning Message Description and Operation |
HEADLAMPS SUGGESTED - 23 | Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
ICE POSSIBLE - 13 | Refer to Indicator/Warning Message Description and Operation |
LOW REFRIG AC OFF - 12 | Refer to Air Temperature Description and Operation in HVAC Systems - Automatic |
MONITORED SYSTEMS OK - 1 | Refer to Indicator/Warning Message Description and Operation |
OIL PRESSURE LOW STOP ENGINE - 35 | Refer to Indicator/Warning Message Description and Operation |
OPTIONS NOT SET - 99 | Refer to Indicator/Warning Message Description and Operation |
PROGRAM PASS KEY - 31 | Refer to Vehicle Theft Deterrent (VTD) Description and Operation in Theft Deterrent |
SERV STABILITY SYS - 54 | Refer to ABS Description and Operation in Antilock Brake System |
SERVICE AC SYSTEM - 14 | Refer to Air Temperature Description and Operation in HVAC Systems - Automatic |
SERVICE AIR BAG - 83 | Refer to SIR System Description and Operation in SIR |
SERVICE CHARGING SYS - 102 | Refer to Charging System Description and Operation in Engine Electrical |
SERVICE ELECTRICAL SYS - 106 | Refer to Indicator/Warning Message Description and Operation |
SERVICE FUEL SYSTEM - 101 | Refer to Powertrain Control Module Description in Engine Controls - 4.6L |
SERVICE IDLE CONTROL - 107 | Refer to Powertrain Control Module Description in Engine Controls - 4.6L |
SERVICE RIDE SYS - 84 | Refer to Road Sensing Suspension Description and Operation in Road Sensing Suspension |
SERVICE STEERING SYS - 127 | Refer to Variable Effort Steering System Description and Operation in Variable Effort Steering |
SERVICE TRANSMISSION - 100 | Refer to Transmission Component and System Description in Automatic Transaxle - 4T80-E |
SERVICE VEHICLE SOON - 3 | Refer to Indicator/Warning Message Description and Operation |
STABILITY ENGAGED - 55 | Refer to ABS Description and Operation in Antilock Brake System |
STARTING DISABLED REMOVE KEY - 33 | Refer to Vehicle Theft Deterrent (VTD) Description and Operation in Theft Deterrent |
THEFT SYSTEM PROBLEM CAR MAY NOT RESTART - 34 | Refer to Vehicle Theft Deterrent (VTD) Description and Operation in Theft Deterrent |
TOP SPEED FUEL CUT-OFF - 111 | Refer to Powertrain Control Module Description in Engine Controls - 4.6L |
TRACTION ENGAGED - 91 | Refer to ABS Description and Operation in Antilock Brake System |
TRACTION OFF - 89 | Refer to ABS Description and Operation in Antilock Brake System |
TRACTION READY - 90 | Refer to ABS Description and Operation in Antilock Brake System |
TRACTION SUSPENDED - 56 | Refer to ABS Description and Operation in Antilock Brake System |
TRANS FLUID RESET - 48 | Refer to Transmission Component and System Description in Automatic Transaxle - 4T80-E |
TRANS HOT IDLE ENGINE -112 | Refer to Transmission Component and System Description in Automatic Transaxle - 4T80-E |
TRUNK OPEN - 24 | Refer to Luggage Compartment Description and Operation in Body Rear End |
TURN SIGNAL ON - 20 | Refer to Exterior Lighting Systems Description and Operation in Lighting Systems |
VEHICLE OVERSPEED - 52 | Refer to Indicator/Warning Message Description and Operation |
VEHICLE SPEED LIMITED TO XXX MPH - 113 | Refer to Road Sensing Suspension Description and Operation in Road Sensing Suspension |
CHANGE ENGINE OIL
The instrument panel cluster (IPC) illuminates the CHANGE ENGINE OIL -- 82 message in the driver information center (DIC) when the powertrain control module (PCM) determines that the engine oil life is 0 percent. The IPC receives a class 2 message requesting illumination from the PCM . After the oil is changed, reset the engine oil monitor. Refer to GM Oil Life System Resetting in Maintenance and Lubrication.
CHECK FUEL GAGE
The IPC illuminates the CHECK FUEL GAGE -- 39 message in the DIC when the IPC is in the gages OFF mode and the fuel level is less than 13.2 liters (3.5 gallons). The IPC receives a class 2 message indicating the fuel level from the body control module (BCM).
CHECK OIL LEVEL
The IPC illuminates the CHECK OIL LEVEL -- 36 message in the DIC when the PCM detects a low engine oil level, and the signal circuit is high. The IPC receives a class 2 message requesting illumination from the PCM.
FUEL LEVEL LOW
The IPC illuminates the FUEL LEVEL LOW -- 11 message in the DIC when the IPC determines that the fuel level is less than 11.4 liters (3 gallons). The IPC receives a class 2 message indicating the fuel level from the BCM.
ICE POSSIBLE
The IPC illuminates the ICE POSSIBLE -- 13 message in the DIC when the outside air temperature drops below 2.2°C (36°F). The IPC receives a class 2 message indicating the outside air temperature from the BCM.
Km/h and MPH
km/h: The IPC illuminates the km/h indicator when the IPC detects that metric units have been requested. The IPC monitors the signal circuit of the INFO RESET (NO) button of the DIC switch.MPH: The IPC illuminates the MPH indicator when the IPC detects that English units have been requested. The IPC monitors the signal circuit of the INFO RESET (NO) button of the DIC switch.
Low Oil Pressure
The IPC illuminates the engine oil pressure indicator when the powertrain control module (PCM) detects low engine oil pressure, and the signal circuit is low. The IPC receives a class 2 message requesting illumination from the PCM.
MONITORED SYSTEMS OK
The MONITORED SYSTEMS OK message illuminates in the DIC when the DIC detects that the recall mode has been requested and no DIC messages have been enabled.
OIL PRESSURE LOW/STOP ENGINE
The IPC illuminates the OIL PRESSURE LOW/STOP ENGINE -- 35 message in the DIC when the PCM detects low engine oil pressure, and the signal circuit is low. The IPC receives a class 2 message requesting illumination from the PCM.
OPTIONS NOT SET
The IPC illuminates the OPTIONS NOT SET -- 99 message in the DIC when the IPC detects a write error in the EEPROM. The EEPROM write error detection is controlled inside the control module. No external circuits are involved.
SERVICE ELECTRICAL SYSTEM
The IPC illuminates the SERVICE ELECTRICAL SYS -- 106 message in the DIC when the one of following exist:
| • | The dash integration module (DIM) detects a malfunction that is related to the ignition switch. The IPC receives a class 2 message requesting illumination from the DIM. |
| • | When there is a PCM related code present. The IPC receives a class 2 message requesting illumination from the PCM. |
SERVICE VEHICLE SOON
The IPC illuminates the SERVICE VEHICLE SOON -- 3 message in the DIC when the PCM detects certain malfunctions that are unrelated to the emission system. The IPC receives a class 2 message requesting illumination from the PCM .
VEHICLE OVERSPEED
The IPC illuminates the VEHICLE OVERSPEED -- 52 message in the DIC when the PCM detects that the vehicle speed is greater than 120 km/h (74.5 mph). The IPC receives a class 2 message requesting illumination from the PCM .
