GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2002 🢒 Eldorado 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lid Adjustment

Front-to-Rear, Side-to-Side, and Up/Down Adjustments
  1. Open the rear compartment.

    2. Object Number: 367530 Size: SH
  2. Loosen the bolts (3).
  3. Align the rear compartment lid (1).

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Secure the bolts (3).

    5. Tighten
    Tighten the bolts to 24 N·m (18 lb ft).

  5. If necessary, complete front-to-rear and up/down lid adjustment at the hinge-to-rear shelf panel bolts.

Up and Down Adjustment at Rear Corners

    Object Number: 367530 Size: SH
  1. Loosen the rubber bumpers (2) in order to raise the lid.
  2. Tighten the rubber bumpers (2).
  3. If necessary, loosen the rear compartment lid pull-down unit in order to complete the adjustment. Refer to Pulldown Unit Replacement - Rear Compartment Lid .
  4. Close the rear compartment.