GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2002 🢒 Eldorado 🢒 Body and Accessories 🢒 Seats 🢒 High Mount Stop Lamp Replacement

Removal Procedure
  1. Slide the carpet-trimmed cover forward in order to disengage the high-mounted stop lamp cover from the rear shelf panel.

    2. Object Number: 365022 Size: SH
  2. Remove the fastener (4).
  3. Pull the stop lamp (1) toward the front of the vehicle and up in order to disengage the retainers.
  4. Disconnect the electrical connectors (5) from the bulbs (3).
  5. Remove the stop lamp (1).

Installation Procedure

    Object Number: 365022 Size: SH
  1. Connect the electrical connectors (5) to the bulbs (3).
  2. Install the stop lamp (1) to the rear shelf.
  3. Engage the stop lamp (1) to the retainer slots in the rear shelf panel (2).

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the fastener (4).

    5. Tighten
    Tighten the fastener to 2 N·m (18 lb in).

  5. Slide the high-mounted stop lamp cover rearward in order to engage the retainer clips to the rear shelf panel.