GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Open the doors.

  2. Object Number: 593289  Size: SH
  3. Push the lower forward edge of the seat cushion rearward in order to disengage the cushion frame from the retainers.
  4. Lift the seat cushion frame upward and pull the seat cushion frame forward.
  5. Remove the rear seat cushion from the floor pan.

Installation Procedure


    Object Number: 315319  Size: SH

    Important: Do not damage the adjacent trim.

  1. Position the seat cushion (3) to the floor pan.
  2. Position the rear edge of the cushion under the rear seat back while positioning the seat belt buckles up through the seat cushion.

  3. Object Number: 593290  Size: SH
  4. Align the frame wire offsets on the front of the seat cushion frame with the retainers on the floor pan.
  5. Push the seat cushion rearward until the offsets engage the retainers.
  6. Press downward on the front edge of the cushion.
  7. Pull the cushion forward in order to secure.
  8. Close the doors.