GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

Schematic Reference: Heated Seats Schematics

1

Did you review the heated seat operation and perform the necessary inspection?

--

Go to Step 2

Go to Symptoms - Seats

2

Verify that the Heated Seat Temperature Adjustment Inoperative complaint is present.

Does the heated seat system operate as described in the system description and operation?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

3

  1. Turn OFF the ignition.
  2. Disconnect the heated seat module harness connector.
  3. Place the heated seat switch in the HIGH position.
  4. Measure the resistance between the battery positive voltage circuit of the heated seat module connector and the heated seat high/low signal circuit of the heated seat module connector.

Does the resistance measure near the specified value?

310 ohms

Go to Step 4

Go to Step 5

4

  1. Place the heated seat switch in the LOW position.
  2. Measure the resistance between the battery position voltage circuit of the heated seat module connector and the heated seat high/low signal circuit of the heated seat module connector.

Does the resistance measure near the specified value?

200 ohms

Go to Step 6

Go to Step 8

5

Test the heated seat high/low signal circuit between the heated seat switch and the heated seat module for a high resistance or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 12

Go to Step 8

6

Test the heated seat high/low signal circuit between the heated seat switch and the heated seat module for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 12

Go to Step 7

7

  1. Turn ON the ignition, with the engine OFF.
  2. Place the heated seat switch in the OFF position.
  3. Test the heated seat high/low signal circuit between the heated seat switch and the heated seat module for a short to battery voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 12

Go to Step 9

8

Inspect for poor connections at the harness connector of the heated seat switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 12

Go to Step 10

9

Inspect for poor connections at the harness connector of the heated seat module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

--

Go to Step 12

Go to Step 11

10

Replace the heated seat switch. Refer to Heated Seat Switch Replacement .

Did you complete the replacement?

--

Go to Step 12

--

11

Replace the heated seat module. Refer to Front Seat Heater Control Module Replacement .

Did you complete the replacement?

--

Go to Step 12

--

12

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2