GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2002 🢒 Eldorado 🢒 Body and Accessories 🢒 Body Front End 🢒 Hood Primary Latch Replacement

Removal Procedure
  1. Remove the radiator support sight shield. Refer to Radiator Support Sight Shield Replacement .

    2. Object Number: 366261 Size: SH
  2. Remove the 2 bolts (3) that retain the primary latch (1).
  3. Remove the hood latch release cable from the latch (1).
  4. Remove the primary hood latch (1).

Installation Procedure

    Object Number: 366261 Size: SH
  1. Install the hood latch release cable to the latch (1).
  2. Position the latch (1) to the vehicle.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the 2 bolts (3) that retain the latch.

    4. Tighten
    Tighten the bolts to 11 N·m (97 lb in).

  4. Install the radiator support sight shield. Refer to Radiator Support Sight Shield Replacement .
  5. Close the hood.
  6. Inspect the latch operation. Adjust the latch if needed. Refer to Hood Latch Adjustment