Retained accessory power (RAP) is a vehicle power mode that permits the operation of selected customer convenience items after the ignition switch is turned OFF. These selected items will remain in operation until a passenger compartment door is opened or until the RAP function timer reaches its shut-off limit.

The modules listed below all receive a RAP message from the body control (BCM) over the serial data circuits. The BCM monitors the ignition switch position, battery condition and passenger compartment door status to determine whether RAP should be initiated. The BCM then sends a message to the listed modules telling them that they are in RAP power mode. The modules then support the operation of the systems under their control as required by their RAP power mode strategy.

RAP will end when one of the following conditions are met:

The BCM then sends a serial data message to the listed modules ending the RAP function.

The modules receiving serial data messages for RAP functions are:

Retained accessory power (RAP) is a vehicle power mode that permits the operation of selected customer convenience items after the ignition switch is turned OFF. These selected items will remain in operation until a passenger compartment door is opened or until the RAP function timer reaches its shut-off limit.

When the BCM is in the RAP function as described above, it closes the RAP and the CONT PWR relays. This provides power during the RAP period for the following:

The BCM opens the RAP relay to end the RAP function when it ends the RAP function as outlined in the previous text.