For 1990-2009 cars only
Removal Procedure
- Insert a small coin between the 2 halves of the transmitter case at the slot provided near the key ring hole.
- Twist the coin in order to open the case.
- Open the transmitter case.
- Remove the battery (2).
Installation Procedure
- Install the battery (2) with the positive (+) side down. Use one 3 V CR2302 battery or the equivalent.
- Align both halves (6, 4) of the transmitter.
- Ensure that the seal is positioned correctly.
- Close the transmitter case.
- Resynchronize the transmitter. Refer to Transmitter Programming .
- Replace the battery when the range of the transmitter decreases to less than 7 m (23 ft).
