Step | Action | Values | Yes | No |
|---|---|---|---|---|
Schematic Reference: Audible Warnings Schematics | ||||
1 | Did you perform the Audible Warnings Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Does the chime activate? | -- | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
3 |
Does the Key In Ignition parameter display No? | -- | Go to Step 6 | Go to Step 4 |
4 |
Does the Key In Ignition parameter display No? | -- | Go to Step 9 | Go to Step 5 |
5 | Test the key-in-ignition switch signal circuit for a short to ground. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 17 | Go to Step 10 |
6 |
Does the Park Lamp Switch parameter or the Head Lamp Switch parameter display On? | -- | Go to Diagnostic System Check - Lighting Systems in Lighting Systems | Go to Step 7 |
7 | Is the vehicle equipped with UQ4? | -- | Go to Step 8 | Go to Step 12 |
8 | With a DMM, measure the AC voltage from the chime module bit 1 signal circuit to the chime module bit 2 signal circuit at the radio interface module (RIM). Refer to Circuit Testing in Wiring Systems. Does the DMM display the specified AC voltage? | 0.7-0.9 V | Go to Step 12 | Go to Step 11 |
9 | Inspect for poor connections at the harness connector of the ignition key alarm switch. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 17 | Go to Step 13 |
10 | Inspect for poor connections at the harness connector of the IPC. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 17 | Go to Step 14 |
11 | Inspect for poor connections at the harness connector of the RIM. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 17 | Go to Step 15 |
12 | Inspect for poor connections at the harness connector of the radio. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 17 | Go to Step 16 |
13 | Replace the ignition key alarm switch. Refer to Steering Column Lock and Ignition Switch Cylinder Replacement - On Vehicle in Steering Wheel and Column. Did you complete the replacement? | -- | Go to Step 17 | -- |
14 |
Important: Program the replacement IPC. Replace the IPC. Refer to Instrument Cluster Replacement . Did you complete the replacement? | -- | Go to Step 17 | -- |
15 | Replace the RIM. Refer to Radio Speaker Amplifier Replacement in Entertainment. Did you complete the replacement? | -- | Go to Step 17 | -- |
16 | Replace the radio. Refer to Radio Replacement in Entertainment. Did you complete the replacement? | -- | Go to Step 17 | -- |
17 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
