GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2002 🢒 Eldorado 🢒 Body and Accessories 🢒 Body Control System 🢒 Outside Rearview Mirror Memory Module Replacement

Removal Procedure

    Object Number: 604112 Size: SH
  1. Open the driver door.
  2. Remove the close-out insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages and Console.
  3. Disconnect the electrical connector (3) from the memory mirror module (MMM) (1).
  4. Release the locking tab (2) in order to remove the module (1).
  5. Slide the (MMM) rearward in order to remove from the bracket.

    6. Object Number: 655588 Size: SH
  6. Remove the fasteners (3) from the (MMM) bracket (1).
  7. Remove the bracket.

Installation Procedure

    Object Number: 655588 Size: SH
  1. Install the (MMM) bracket (1) to the instrument panel.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the fasteners (3).

    3. Tighten
    Tighten the fasteners to 6 N·m (53 lb in).


    Object Number: 604112 Size: SH
  3. Slide the (MMM) module (1) into the bracket.
  4. Ensure the locking tab (2) is secure.
  5. Connect the electrical connector (3).
  6. Install the close-out insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages and console.
  7. Close the driver door.