GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2000 🢒 Escalade 🢒 Body and Accessories 🢒 Interior Trim 🢒 Power Seat Riser Trim Cover Replacement

Removal Procedure

    Object Number: 402370 Size: SH
  1. Remove the screws (2) from the trim cover (1).
  2. Unsnap and remove the trim cover from the seat riser.

Installation Procedure

    Object Number: 402370 Size: SH
  1. Install the trim cover (1) to the seat riser.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the trim cover screws (2).

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).