GM Service Manual Online
For 1990-2009 cars only

Back Body Opening Upper Applique Replacement Escalade


Object Number: 1672144  Size: MF

Callout

Component Name

Caution: When a lift gate hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

1

Rear Applique Screws (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

Tip

    • Position the center screw to the applique first, followed by the hinge nuts second.
    • Install the outer screws last and torque the screws in the same sequence.

2

Rear Applique Nuts (Qty: 2)

Tighten
9 N·m (80 lb in)

Tip
Disconnect the electrical connector.

3

Rear Applique