For 1990-2009 cars only
Removal Procedure
- Insert a small bladed tool, at the slot provided near the key ring hole (5), between the two halves (6, 4) of the transmitter case.
- Twist the small bladed tool, between the two halves in order to separate the case.
- Remove the battery (2) from the transmitter.
Installation Procedure
- Install the battery (2) with the positive side down into the transmitter.
- Ensure the seal (7) is in position. Align the two halves of the case (6, 4), and snap the two halves together.
- Verify the operation of the transmitter.
