Unwated ABS Or Valve Activation On Low Speed Turns - keywords brake control EBCM EBTCM stabilitrak TCS VSES
| Subject: | Unwanted ABS or Valve Activation on Low Speed Turns |
| Models: | 2007-2008 Cadillac Escalade, ESV, EXT |
| 2007-2008 Chevrolet Avalanche, Silverado, Suburban, Tahoe |
| 2007-2008 GMC Sierra, Yukon, Yukon Denali, Yukon XL, Yukon Denali XL |
| With Stabilitrac (RPO JL4) |
This PI was superseded to update Recommendation/Instructions. Please discard PIT4411.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition/Concern:
Some customers may comment on an unwanted ABS or valve activation on low speed turns with no diagnostic codes set in the vehicle. The concern may be noticed on left and right hand turns, but is more common on left hand turns. This may be a result of Corner Brake Control which is a part of the EBCM software. There is no loss of stability or unwanted brake apply, only ABS motor noise.
Recommendation/Instructions:
Please don't replace the EBCM or any stabilitrak components as this will not resolve the concern.
Please reprogram the EBCM. An updated calibration has been released to resolve this concern.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.
