Electronic Traction Control Switch Replacement Stabilitrak

1. Remove the instrument panel (I/P) bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.



2. Gently lift the retaining tabs (2) and remove the stabilitrak switch (3) from the I/P assembly (1).



3. Disconnect the harness connector from the stabilitrak switch.

1. Connect the harness connector to the stabilitrak switch.



2. Install the stabilitrak switch (3) into the I/P assembly (1)
3. Ensure that the switch is secure into both retaining tabs (2).
4. Install the I/P bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.