Removal Procedure
- Remove the right rear quarter trim panel. Refer to
Rear Quarter Trim Panel Replacement - Right Side
in Interior Trim.
- Disconnect the electrical connector from the auxiliary blower motor processor (1).
- Remove the retaining screws from the auxiliary blower motor processor (1).
- Remove the auxiliary blower motor processor (1)
from the auxiliary HVAC module (2).
Installation Procedure
- Install the auxiliary blower motor processor (1)
to the auxiliary HVAC module (2).
Notice: Refer to Fastener Notice in the Preface section.
- Install the retaining screws to the auxiliary blower motor processor (1).
Tighten
Tighten the screws to 1.6 N·m (14 lb in).
- Connect the electrical connector to the auxiliary blower motor processor (1).
- Install the right rear quarter trim panel. Refer to
Rear Quarter Trim Panel Replacement - Right Side
in Interior Trim.