DTC C056D, C127A, C127B, C127C, C12E9, C12F2-C12F6, or C12FE for Cadillac Escalade ESV 2008
Diagnostic Instructions
DTC Descriptors
DTC C056D 00: ECU Hardware Performance
DTC C127B: ECU Hardware Performance
DTC C12F2 - C12F6: ECU Hardware Performance
DTC C12FE: ECU Hardware Performance
DTC C056D 3C: ECU Hardware Performance Internal Communication Failure
DTC C056D 59: ECU Hardware Performance Circuit/Component Protection Time-out
DTC C12E9: ECU Hardware Performance Circuit/Component Protection Time-out
Circuit/System Description
The electronic brake control module (EBCM) detects an internal malfunction.
Conditions for Running the DTC
| • | Ignition voltage is greater than 10 volts. |
Conditions for Setting the DTC
The EBCM detects an internal malfunction.
Action Taken When the DTC Sets
| • | The EBCM disables the antilock brake system (ABS), traction control and the vehicle stability enhancement system (VSES) for the duration of the ignition cycle. |
| • | A DIC message and/or a warning indicator may be displayed. |
Conditions for Clearing the DTC
| • | The condition for the DTC is no longer present. |
| • | The EBCM clears the history DTC when a current DTC is not detected in 40 consecutive drive cycles. |
Reference Information
Schematic Reference
Antilock Brake System Schematics
Connector End View Reference
Component Connector End Views
Description and Operation
ABS Description and Operation
Electrical Information Reference
Scan Tool Reference
Control Module References for scan tool information
Circuit/System Verification
Verify DTC C056D is not set.
| ⇒ | If DTC is set, replace the EBCM. |
Repair Instructions
Perform the
Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for ABS replacement, setup, and programming