Fan Replacement Mechanical

Special Tools

1. Remove the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement.
2. Install the J-48460 Fan Clutch Remover and Installer Kit (1).
3. Install the J 41240-5A Fan Clutch Wrench (2).



4. Remove the fan hub nut from the water pump in a counterclockwise rotation.



5. Remove the fan clutch bolts from the rear of the fan blade.
6. Separate the fan clutch from the fan blade.

Warning: Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced cooling fan could fly apart causing personal injury and property damage.

1. Install the fan clutch onto the fan blade.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the fan clutch bolts

Tighten
Tighten the bolts to 23 N·m (17 lb ft).




3. Install the fan assembly.



4. Install the J-48460 Fan Clutch Remover and Installer Kit (1) and J 41240-5A Fan Clutch wrench (2).

Tighten
Tighten the nut clockwise to 56 N·m (41 lb ft).

5. Install the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement.