Removal Procedure
- Remove the third pillar molding. Refer to
Center Pillar Upper Garnish Molding Replacement
.
- Remove the left rear coat hook, if equipped. Refer to
Coat Hook Replacement
.
- Remove the rear headliner retainers from the front headliner.
- Carefully lower the headliner from the roof hook and loop retainers.
- Disconnect the electrical connector from the inside air temperature sensor.
- Partially remove the auxiliary inside air temperature sensor from the headliner.
- Remove the sensor grille from the auxiliary inside air temperature sensor.
- Remove the auxiliary inside air temperature sensor from the headliner.
Installation Procedure
- Install the new sensor grille to the headliner.
- Install the inside air temperature sensor to the headliner and sensor grille.
- Connect the electrical connector to the inside air temperature sensor.
- Secure the headliner to the roof hook and loop retainers.
- Install the rear headliner retainers to the front headliner.
- Install the left rear coat hook, if equipped. Refer to
Coat Hook Replacement
.
- Install the third pillar molding. Refer to
Center Pillar Upper Garnish Molding Replacement
.