Special Tools

1. Inspect the pump cover, all check valve retainer and ball assemblies (237), cup plugs (235, 236) and orificed cup plugs (238, 240).



2. Inspect the pump cover for the following conditions:

•	Worn or damaged bushings

•	Foreign material or debris

•

Porosity

•	Scored or irregular mating faces

•	Cross channel leaks




3. Using the J 21465-15 which is part of J 21465-01 bushing service set  (1) with the J 7004-A remover  (2), remove the stator shaft front bushing (234).



4. Using the J 25019-14 bushing installer  (2) with the J 7004-A remover  (1), remove the stator shaft rear bushing (241).

1. Using the J 21465-2 which is part of J 21465-01 bushing service set  (1) and the J 8092 driver handle  (2), install a new stator shaft front bushing (234).



2. Using the J 34196-2 (1) which is part of kit J 34196-B bushing service set and the J 8092 driver handle  (2) , install the stator shaft rear bushing (241).