Callout
| Component Name
|
Preliminary Procedure
- Open and support the rear liftgate assembly.
- Disengage the high mounted stop lamp electrical harness grommet and connector from the rear body panel.
|
1
| Back Body Opening Upper Applique Bolt (Qty: 2)
Caution: Refer to Fastener Caution in the Preface section.
Tighten 10 N·m (89 lb in) |
2
| High Mounted Stop Lamp Electrical Connector
|
3
| Retainer Pin (Qty: 3)
Procedure
- Release the retainer pins and push upward on the rear edge of the applique.
- Slide the applique to the left in order to release the applique hinges from the liftgate hinge pins.
- Remove the applique from the vehicle.
|
4
| Back Body Opening Upper Applique
Tip Transfer the high mounted stop assembly. Refer to
High Mount Stop Lamp Replacement. |