GM Service Manual Online
For 1990-2009 cars only

Window Height Set

  1. Slide the sunroof sunshade to the open position.
  2. Remove the sunroof panel side covers. Refer to Sunroof Panel Side Opening Closeout Cover Replacement.
  3. Cycle the sunroof to the fully closed position.
  4. Loosen the sunroof window panel screws.

  5. Object Number: 1685761  Size: SH
  6. Individually adjust the 4 corners of the sunroof window panel.
  7. Adjust the front of the sunroof window panel to 0.0 -- 1.0 mm (0.040 in) below the top surface (3) of the roof panel.
  8. Adjust the rear of the sunroof window panel to 1.0+0.0 mm (0.040 in) above the top surface (2) of the roof panel.
  9. Caution: Refer to Fastener Caution in the Preface section.

  10. Tighten the sunroof window panel screws.
  11. Tighten
    Tighten the sunroof window panel screws to 4 N·m (35 lb in).

  12. Install the sunroof panel side covers. Refer to Sunroof Panel Side Opening Closeout Cover Replacement.
  13. Close the sunshade.