Rear Power Door Lock Switch Replacement for Cadillac Escalade EXT 2002

1. Remove the upper garnish molding. Refer to Rear Upper Garnish Molding Replacement in Interior Trim.



2. Remove the D-Pillar molding.
3. Disconnect the electrical connectors.



4. Push on the tab (2) in order to remove the switch from the D-Pillar molding.
5. Insert a small screwdriver between the tab (1) in order to pry out the switch from the case.

1. Install the switch into the case by pushing until the tab (1) locks into place.
2. Install the switch assembly into the D-Pillar molding.
3. Connect the electrical connectors.



4. Install the D-Pillar molding to vehicle.
5. Install the upper garnish molding to vehicle. Refer to Rear Upper Garnish Molding Replacement in Interior Trim.