Rear Seat Number 2 Riser Latch Assembly Replacement Bench Front Latch

1. Disengage the velcro strips (1) to gain access to the riser bolts



2. Remove the bolts (1) that retain the front riser (2) to the cushion frame.



3. Disconnect the cable (1) from the riser assembly.
4. Remove the riser assembly from the seat frame.

1. Install the riser assembly to the seat frame.
2. Connect the cable (1) to the riser assembly.

Notice: Refer to Fastener Notice in the Preface section.




3. Install the bolts (1) that retain the front riser (2) to the cushion frame.

Tighten
Tighten the bolts to 53 N·m (39 lb ft).




4. Engage the velcro strips (1).

Rear Seat Number 2 Riser Latch Assembly Replacement Bench Rear Latch

1. Disengage the J-Clips on the back of the seat cushion frame in order to gain access to the bolts.
2. Remove the bolts (1) from the rear seat riser assembly (2).
3. Disconnect the cable (3) from the riser assembly.
4. Remove the riser assembly from the seat frame.

1. Install the riser assembly to the seat frame.

Notice: Refer to Fastener Notice in the Preface section.

2. Connect the cable (3) to the riser assembly.
3. Install the bolts (1) that retain the rear riser assembly (2) to the cushion frame.

Tighten
Tighten the bolts to 53 N·m (39 lb ft).

4. Engage the J-Clips on the back of the seat cushion frame.