Rear Side Door Window Module Replacement for Cadillac Escalade EXT 2006

Rear Side Door Window Module Replacement Tahoe/Yukon/Escalade

1. Raise and support the window glass.
2. Remove the trim panel. Refer to Rear Side Door Trim Panel Replacement .
3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
4. Disconnect the window motor electrical connector.
5. Loosen the two window clamp bolts on the regulator.
6. Remove the bolts retaining the window regulator to the door.



7. Remove the module from the door.

1. Install the module to the door.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the bolts retaining the regulator to the door.

Tighten
Tighten the bolts to 9 N·m (7 lb ft).

3. Align the window to the regulator, and tighten the clamp bolts.

Tighten
Tighten the clamp bolts to 9 N·m (7 lb ft).

4. Connect the window motor electrical connector.
5. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
6. Install the trim panel. Refer to Rear Side Door Trim Panel Replacement .