Preliminary Procedure

If installing a NEW pump rotor and slide into the torque dampener housing, ensure to properly select the correct rotor and slide before performing this procedure. Refer to Fluid Pump Selective Measurement and Fluid Pump Selective Specifications .

1

Pump Slide Fluid Seal Ring

2

A/Trans Fluid Pump Slide O-Ring Seal

3

A/Trans Fluid Pump Slide Pivot Pin

4

A/Trans Fluid Pump Slide Seal Support

Tip
The seal support is circular. The seal is rectangular.

5

A/Trans Fluid Pump Slide Seal

6

A/Trans Fluid Pump Slide

7

A/Trans Fluid Pump Slide Outer Spring

8

A/Trans Fluid Pump Vane Ring

9

A/Trans Fluid Pump Rotor Guide

Notice: Align the rotor guide tabs to the notches on the bottom of the rotor. Failure to do so may cause transmission damage.

10

A/Trans Fluid Pump Rotor

11

A/Trans Fluid Pump Vanes (Qty: 13)

12

A/Trans Fluid Pump Slide O-Ring Seal