Adjustment Procedure
- With the endgate closed, determine the amount of adjustment will be needed.
- If adjustment is necessary, remove the endgate. Refer to
Endgate Replacement.
- Mark the position of the hinges with a grease pencil.
Important: Use a screwdriver to move the adjustment hinge.
- Loosen the endgate bolts and adjust the endgate hinges by moving the hinges in the following directions.
- Reinstall the endgate and determine if any further adjustments are needed.
Notice: Refer to Fastener Notice in the Preface section.
- When the proper adjustments are set, tighten the hinge bolts.
Tighten
Tighten the hinge bolts to 40 N·m (30 lb ft).