GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2004 🢒 Escalade - 2WD 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    2. Object Number: 582397 Size: SH
  2. Remove the stabilizer shaft insulator bracket mounting bolts.
  3. Remove the stabilizer shaft insulators brackets.
  4. Lower the stabilizer shaft and remove the stabilizer shaft insulators.
  5. Inspect all of the parts for wear or damage.

Installation Procedure

    Important: Place the stabilizer shaft insulators on the stabilizer bar with the slits facing toward the front of the vehicle.


    Object Number: 582397 Size: SH
  1. Install the stabilizer shaft insulators to the stabilizer bar.
  2. Install the stabilizer shaft insulator brackets to the rear axle.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the stabilizer shaft bracket mounting bolts.

    4. Tighten
    Tighten the insulator bracket bolts to 33 N·m (24 lb ft).

  4. Lower the vehicle.