GM Service Manual Online
For 1990-2009 cars only

Object Number: 809105  Size: A2

See Engine Compartment Overview for the location of the engine air cleaner/filter and the air filter restriction indicator, if equipped.

When to Inspect

If your vehicle is equipped with an air filter restriction indicator, it lets you know when the engine air cleaner/filter needs to be replaced. On vehicles with a restriction indicator, you should inspect the air filter restriction indicator at every oil change and replace the engine air cleaner/filter when the indicator tells you to. On vehicles without an air filter restriction indicator, you should inspect the air cleaner/filter at every oil change and replace it at the first oil change after 25,000 miles (40 000 km). See Scheduled Maintenance for more information.

How to Inspect

Vehicles with an Air Filter Restriction Indicator

Locate the air filter restriction indicator on the engine air cleaner/filter cover. When the indicator turns black or is in the red/orange "change" zone, replace the filter and reset the indicator. See the steps following to replace the engine air cleaner/filter and to reset the air filter restriction indicator.

Vehicles without an Air Filter Restriction Indicator

To inspect the air cleaner/filter, remove the engine air cleaner/filter from the vehicle using the steps following. When you have the engine air cleaner/filter removed, lightly shake it to release loose dust and dirt. If the engine air cleaner/filter remains caked with dirt, a new filter is required.

Replacing the Engine Air Cleaner/Filter and Resetting the Air Filter Restriction Indicator


    Object Number: 808001  Size: B3
  1. Locate the air cleaner/filter assembly on the front corner of the engine compartment on the passenger's side of the vehicle.
  2. Loosen the screws on the cover of the housing and lift up the cover.

  3. Object Number: 808004  Size: B3
  4. Remove the engine air cleaner/filter from the housing. Care should be taken to dislodge as little dirt as possible.
  5. Clean the engine air cleaner/filter sealing surfaces and the housing.
  6. Inspect or replace the engine air cleaner/filter.
  7. Reinstall the cover and tighten the screws.
  8. Reset the air filter restriction indicator, if equipped, by pressing the top button on the indicator.

Caution: Operating the engine with the air cleaner/filter off can cause you or others to be burned. The air cleaner not only cleans the air; it helps to stop flames if the engine backfires. If it is not there and the engine backfires, you could be burned. Do not drive with it off, and be careful working on the engine with the air cleaner/filter off.