Passenger Door Module Lock Up - kw control calibration panel electrical switch transmitter position operation display inoperative module right program RKE accessory mode PDM passenger program

When servicing the vehicle with the VIN you entered, the following diagnosis might be helpful if the vehicle exhibits the described symptoms.

Some customers may comment that there is no function to outside rear view mirrors, power windows, power door locks or remote keyless entry system. Some Passenger Door modules built between November 2003 and March 2004 may not have had their calibration bit flashed prior to vehicle installation. Fix is to replace the PDM as they cannot be reprogrammed.

.

Please follow this diagnosis process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. If these steps do not resolve the condition, please contact GM TAC for further diagnostic assistance. This diagnostic approach was developed for the vehicle with the VIN you entered and should not be automatically be used for other vehicles with similar symptoms.

(04 CADILLAC ESCALADE and EXT 2WD & AWD) and (04 CHEVROLET AVALANCHE 2WD and 4WD) and (04 CHEVROLET SILVERADO 2WD and 4WD) and (04 GMC SIERRA 2WD and 4WD) and (04 CHEVROLET TAHOE 2WD and 4WD) and (04 CHEVROLET SUBURBAN 2WD and 4WD) and (04 GMC YUKON 2WD and 4WD) and (04 GMC YUKON XL 2WD and 4WD) and (04 GMC YUKON DENALI AWD) and (04 GMC YUKON DENALI XL AWD) and (04 HUMMER H2)

.