Cannot Program the Tire Pressure Monitoring (TPM) System after Installing Passengers Module (PDM) - kw UJ6 program passenger door loss sensor DIC message GMT820 GMT830GMT806 low display

When servicing the vehicle with the VIN you entered, the following diagnosis might be helpful if the vehicle exhibits the described symptoms.

You may have a condition where you are unable to program the tire pressure monitoring system (TPM) after the Passengers door module (PDM) was replaced. Performing the set up procedure that is listed in bulletin: 04-03-16-002 will not resolve the condition.

The Keyless Entry Transmitter relearn is performed before trying to enter the TPM relearn procedure. The PDM will not relearn the TPM system until the Keyless Entry Transmitter has been set up.

.

Please follow this diagnosis process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. If these steps do not resolve the condition, please contact GM TAC for further diagnostic assistance. This diagnostic approach was developed for the vehicle with the VIN you entered and should not be automatically be used for other vehicles with similar symptoms.

(2004 Cadillac Escalade, Escalade ESV, Escalade EXT (RPO UJ6)) and (2004 Chevrolet Suburban, Tahoe (RPO UJ6)) and (2004 GMC Yukon, Yukon Denali, Yukon XL with Tire Pressure Monitoring System (RPO UJ6)

.