• |
- Turn
Signal/Taillamp
|
To replace one of these bulbs, do the following:
- Remove
the two screws from the taillamp assembly.
- Remove the taillamp assembly.
- Press the release tab and turn the bulb socket counterclockwise to remove
it from the taillamp assembly. The sidemarker lamp does not have a release tab.
- Pull the bulb straight out from the socket.
- Install a new bulb into the socket and insert it into the taillamp assembly
- Turn the bulb socket clockwise until it clicks. The sidemarker lamp does
not have a release tab and therefore will not click when it is installed.
- Reinstall the taillamp assembly and tighten the screws.